Globe Scientific Beaker, PMP (TPX), Molded Graduations, 25mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 25mL, Cs/20 Globe Scientific Beaker, PMP (TPX), Molded Graduations, 50mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 50mL, Cs/20 Globe Scientific Beaker, PMP (TPX), Molded Graduations, 100mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 100mL, Cs/12 Globe Scientific Beaker, PMP (TPX), Molded Graduations, 250mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 250mL, Cs/16 Globe Scientific Beaker, PMP (TPX), Molded Graduations, 500mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 500mL, Cs/12 Globe Scientific Beaker, PMP (TPX), Molded Graduations, 1000mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 1000mL, Cs/4 Globe Scientific Beaker, PMP (TPX), Molded Graduations, 2000mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 2000mL, Cs/4 Globe Scientific Beaker, PMP (TPX), Molded Graduations, 3000mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 3000mL, Cs/2 Globe Scientific Beaker, PMP (TPX), Molded Graduations, 5000mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 5000mL, Cs/2

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

• Special no-drip pour spout.
• Graduated in milliliters (mL).
• Shatter-resistant.
• Chemically resistant to most acids, bases and many common solvents
• Crystal clear polymethylpentene (PMP).
• Molded graduations.
• Can withstand temperatures of up to 180°C for short periods of time.
• Autoclavable at 121°C for 20 minutes.
• Also known as TPX®, a registered trademark of Mitsui Chemicals.
• Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).