Globe Scientific Beaker, PMP (TPX), Molded Graduations, 25mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 25mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 50mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 50mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 100mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 100mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 250mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 250mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 500mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 500mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 1000mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 1000mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 2000mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 2000mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 3000mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 3000mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 5000mL Globe Scientific Beaker, PMP (TPX), Molded Graduations, 5000mL

SKU: VGSC-6015411 VGSC-601541 VGSC-6015421 VGSC-601542 VGSC-6015431 VGSC-601543 VGSC-6015451 VGSC-601545 VGSC-6015461 VGSC-601546 VGSC-6015481 VGSC-601548 VGSC-6015491 VGSC-601549 VGSC-6013301 VGSC-601330 VGSC-6013311 VGSC-601331

Availability: In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock

Regular price $12.99
Capacity*
Pack of*

The Higher the Magnification - The More Detail You'll See

Magnification 40x
Magnification 1000x
Magnification 2500x

Magnification is the ability of your microscope to make small objects seem larger. As the magnification increases the area being viewed will be decrease is size but the detail of the area being viewed will improve.

Amscope microscopes come with multiple magnifications to aid you in finding the proper magnification for viewing each specimen.

Camera Connection Types

When comaring 2.0 and 3.0 there are few major differences. First the transfer rates. USB 2.0 offers transfer rates of 480 Mbps and USB 3.0 offers transfer rates of 4.8 Gbps - that's 10 times faster.

Camera Resolution

The most important factor in ensuring successful microscopic imaging is choosing the appropriate optics and camera for your application that gives you more data and higher image quality. When selecting a microscope camera, it is best to base your decision on the most important requirements for your microscopic observation.

* Required Fields

Key Features

    • Beaker, 25mL, PMP (TPX)
    • Beaker, 25mL, PMP (TPX)
    • Beaker, 50mL, PMP (TPX)
    • Beaker, 50mL, PMP (TPX)
    • Beaker, 100mL, PMP (TPX)
    • Beaker, 100mL, PMP (TPX)
    • Beaker, 250mL, PMP (TPX)
    • Beaker, 250mL, PMP (TPX)
    • Beaker, 500mL, PMP (TPX)
    • Beaker, 500mL, PMP (TPX)
    • Beaker, 1000mL, PMP (TPX)
    • Beaker, 1000mL, PMP (TPX)
    • Beaker, 2000mL, PMP (TPX)
    • Beaker, 2000mL, PMP (TPX)
    • Beaker, 3000mL, PMP (TPX)
    • Beaker, 3000mL, PMP (TPX)
    • Beaker, 5000mL, PMP (TPX)
    • Beaker, 5000mL, PMP (TPX)

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Shatter-resistant.
  • Chemically resistant to most acids, bases and many common solvents
  • Crystal clear polymethylpentene (PMP).
  • Molded graduations.
  • Can withstand temperatures of up to 180°C for short periods of time.
  • Autoclavable at 121°C for 20 minutes.
  • Also known as TPX®, a registered trademark of Mitsui Chemicals.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

People Also Viewed

Recently Viewed