Globe Scientific Beaker, PP, Printed Graduations, 25mL Globe Scientific Beaker, PP, Printed Graduations, 25mL, Cs/20 Globe Scientific Beaker, PP, Printed Graduations, 50mL Globe Scientific Beaker, PP, Printed Graduations, 50mL, Cs/20 Globe Scientific Beaker, PP, Printed Graduations, 100mL Globe Scientific Beaker, PP, Printed Graduations, 100mL, Cs/12 Globe Scientific Beaker, PP, Printed Graduations, 250mL Globe Scientific Beaker, PP, Printed Graduations, 250mL, Cs/16 Globe Scientific Beaker, PP, Printed Graduations, 500mL Globe Scientific Beaker, PP, Printed Graduations, 500mL, Cs/12 Globe Scientific Beaker, PP, Printed Graduations, 1000mL Globe Scientific Beaker, PP, Printed Graduations, 1000mL, Cs/4 Globe Scientific Beaker, PP, Printed Graduations, 2000mL Globe Scientific Beaker, PP, Printed Graduations, 2000mL, Cs/4 Globe Scientific Beaker, PP, Printed Graduations, 3000mL Globe Scientific Beaker, PP, Printed Graduations, 3000mL, Cs/2 Globe Scientific Beaker, PP, Printed Graduations, 5000mL Globe Scientific Beaker, PP, Printed Graduations, 5000mL, Cs/2

SKU: VGSC-6018211 VGSC-601821 VGSC-6018221 VGSC-601822 VGSC-6018231 VGSC-601823 VGSC-6018241 VGSC-601824 VGSC-6018251 VGSC-601825 VGSC-6018261 VGSC-601826 VGSC-6018271 VGSC-601827 VGSC-6008181 VGSC-600818 VGSC-6008191 VGSC-600819

Availability: In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock

$5.00
Capacity
Pack of

The Higher the Magnification - The More Detail You'll See

Magnification 40x
Magnification 1000x
Magnification 2500x

Magnification is the ability of your microscope to make small objects seem larger. As the magnification increases the area being viewed will be decrease is size but the detail of the area being viewed will improve.

Amscope microscopes come with multiple magnifications to aid you in finding the proper magnification for viewing each specimen.

Camera Connection Types

When comparing 2.0 and 3.0 there are few major differences. First the transfer rates. USB 2.0 offers transfer rates of 480 Mbps and USB 3.0 offers transfer rates of 4.8 Gbps - that's 10 times faster.

Camera Resolution

The most important factor in ensuring successful microscopic imaging is choosing the appropriate optics and camera for your application that gives you more data and higher image quality. When selecting a microscope camera, it is best to base your decision on the most important requirements for your microscopic observation.

Key Features

  • Beaker, 25mL, PP
  • Beaker, 25mL, PP
  • Beaker, 50mL, PP
  • Beaker, 50mL, PP
  • Beaker, 100mL, PP
  • Beaker, 100mL, PP
  • Beaker, 250mL, PP
  • Beaker, 250mL, PP
  • Beaker, 500mL, PP
  • Beaker, 500mL, PP
  • Beaker, 1000mL, PP
  • Beaker, 1000mL, PP
  • Beaker, 2000mL, PP
  • Beaker, 2000mL, PP
  • Beaker, 3000mL, PP
  • Beaker, 3000mL, PP
  • Beaker, 5000mL, PP
  • Beaker, 5000mL, PP

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.

DON'T NEED A CASE? BUY BY THE EACH!

  • Special no-drip pour spout.
  • Graduated in milliliters (mL).
  • Break-resistant
  • Translucent polypropylene (PP).
  • Printed graduations.
  • Chemically resistant to most acids, bases and many common solvents.
  • Can withstand a continuous working environment of up to 135°C.
  • Autoclavable at 121°C for 20 minutes.
  • Conforms to ISO 7056-1981 (E) and BS 5404 Part 1 (International standards for plastic beakers).

 

Beaker Size: Height Outer Diameter Graduation Range Graduation Intervals
25mL 49mm 34mm 5 - 25mL 1mL
50mL 60mm 41mm 10 - 50mL 2mL
100mL 72mm 51mm 20 - 100mL 5mL
250mL 95mm 71mm 50 - 250mL 10mL
500mL 119mm 87mm 100 - 500mL 10mL
1000mL 147mm 109mm 100 - 1000mL 20mL
2000mL 183.5mm 132mm 200 - 2000mL 50mL
3000mL 201mm 158mm 1000 - 3000mL 500mL
5000mL 229mm 188.5mm 1000 - 5000mL 500mL

 

People Also Viewed

Recently Viewed